100% Authentic Products
Quality Original Tiling Tools
Free Shipping Over $99
Free Shipping Over $99
Best Customer Service
Best Customer Service
From all tiling tools for tile installation
* Subscribe to get special offers, free giveaways, and once-in-a-lifetime deals.
Tiling is an important part of the decoration, the master's skills affect the overall effect. Most of the previous master are manually measured paving, and often had such distress: paving is not flat, uneven; gaps are uneven, the size is not the same; drum extrusion, resulting in breakage off, etc.; repeated alignment baseline, slow construction, time-consuming and labor-intensive.
Now technology has developed, paving tools are also changing, many people are now using paving tools, can help us more perfect and error-free construction, you know the tile paving tools - tile leveler?
Composed of pushing pliers, wedges and bases, pushing pliers and wedges can be reused, the base can not. The common base on the market are 1mm, 1.5mm, 2mm, 2.5mm, 3mm specifications. The base is different mainly according to how wide the distance between the customer's tiles left seam.
Divided into non-exchangeable steel needle, replaceable steel needle without level, replaceable steel needle with level, are reusable.
Regular size: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 9.0mm, 10.0mm. The purpose is to adjust the size of the gap in the middle of the tile, so that the tiles are neat and beautiful, so that the gap between the tiles consistent. Uniform. The main purpose is to heat up and cold shrinkage reserved position, to avoid the emergence of tile bulge due to heat up and cold shrinkage extrusion.
The company is a production, sales, research and development and integration of production-oriented enterprises, the company is committed to the production of tile crosses, sales has been more than 6 years. Production of various sizes, styles and models of tile crosses, tile paving accessories, tile spacers for various tile joints, tile levelers and other products. Our tile crosses have complete specifications and various styles. The specifications are from 1.0MM-10.0MM, and the styles are standard type, thickened and extended type, standard type desirable type, thickened and extended type desirable type, T-frame, etc. There are also a variety of sizes of tile inserts, tile levelers, etc.
The company has been committed to the production and research of tile paving accessories for many years, combined with foreign construction technology, domestic paving habits and differences between the South and North, and constantly improve product quality, utility. Make tile paving more standard and easier. The company is committed to tile paving simplification project, developed a variety of styles of tile cross, "T" type tile clips, tile leveler and other products. The use of tile levelers and tile crosses can solve a series of problems in the process of tile laying, such as tile seaming, positioning, fixing, leveling and so on.
Our tile positioners are exported to Europe, America, Japan, the Middle East and Africa, and can meet the different needs of various customers for tile positioners, with specifications of 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 8.0mm, 10.0mm, thickened and longer models, models with handles, desirable tile positioners, hollow type Tile positioner, Y type, T type and other styles, is a tile positioner manufacturer with complete specifications.
The color of the product is divided into milk white and transparent color, are made of HDPE raw materials through the process of injection molding of small products produced by large models, the product is beautiful, neat and generous, over the years the product has been imitated, but never been surpassed. As the industry leader for many years, we have been leading the healthy development of the industry, we firmly believe that no progress is backward, so we manufacture each tile positioner with care, so we continue to improve and perfect the mold, we firmly believe that --- our product quality is good, customers have no trouble!
Tile positioning cross, also known as plastic cross, foreigners call it tile spacer, plastic cross, translation is tile spacer, tile locator or plastic cross. Tile cross in English is called TILE SPACER, PLASTIC CROSS, translation tile cross positioning frame, tile spacers, etc.
Our tile crosses are made of brand-new material HDPE injection molding, without adding any back material, the product is smooth and full, and the size is standard. Meet the requirements of environmental protection, the advantages of odorless, impact resistance, good toughness, etc. for no color for milk white, translucent or customize a variety of colors. The more mature products on the market are using PE material, the color is porcelain white, the advantages of good toughness, good tensile strength, non-toxic, impact resistance, moisture resistance, chemical resistance, not easy to burst mouth
At present, the more mature tile crosses on the market are made of HDPE material, the direct use of HDPE material injection molding and appearance of porcelain white, the other is PE material with the right amount of industrial titanium dioxide by injection molding machine high temperature melt angle and then injection molding, transparent white, the two in the use of methods, the principle of use is no difference.
With the continuous updating of the product, due to the development and expansion of different customer needs, different places, different sizes of special models, the use of materials from the original single use of HDPE material as raw materials, but also for different regions, different environments and the use of different materials as raw materials, such as PS, PP, etc.
The main role of the tile cross is to adjust the size of the gap in the middle of the tile, so that the gap between the tiles consistent, so as to achieve a beautiful, neat tiling effect. In addition, through the product shape characteristics, the use of the product "cross" structure can easily achieve the tile corner and tile corner positioning, fixed role, not because of misuse and other reasons to make the tile has been taped to shift.
Tile cross with the increasing acceptance of the market, making the product more and more mature, there are a variety of more in line with different customer needs, different places, different sizes of special models, in addition to the conventional standard type also appeared thickened and lengthened type, extra-thick and extra-long type, with handle (bracket) desirable type, "T" type, wedge type and other models.
According to the use of different tile shape, the mainstream market can be divided into: tile cross, tile T-shaped frame, tile Y-shaped frame and wedge-shaped tile spacer.
According to the size of the product can be divided into: ordinary models, thickened and extended models, models with brackets, hollow models.
After years of development, we now have a complete range of domestic tile positioner specifications and several product series, including standard type, standard type removable model, thickened and extended type, thickened and extended type removable model, extra thick type, "T" type tile positioner, and many specifications of tile inserts and tile levelers, which can meet the needs of customers tiling.
4.1 The company specializes in the production and sales of tiling accessories, the company produces and sells a full range of 1-10 mm wide tile crosses, and a variety of styles to choose from: common size, reinforced size, with handle models, Y-shaped frame, T-shaped frame, removable type, wedge-shaped spacers and other shapes and styles of tile retainers, and a variety of models of tile levelers. Can be sold under a brand name.
4.2 Product specifications.
Its specifications are 1.0mm,1.5mm,2.0mm,2.5m,3.0mm,4.0mm,5.0mm,6.0mm,8.0mm,10.0mm etc. 1.5mm plastic cross specification means the width is 1.5mm.
Our company produces and sells many styles of tile crosses. In addition to the regular standard sizes, we also have thickened and longer tile crosses and extra thick tile crosses.
Thickened and longer than the standard type, in the width of the premise of the same, enlarge the length and thickness: the length reached 25MM, the thickness reached 3MM, compared to the standard model is more convenient to hold and put, easier to hold and put the tile cross can make greatly improve the efficiency of tile paving.
The company produces and sells a full range of sizes tile positioning cross, a variety of models and styles of tile positioning cross, and tile puller (tile leveler), which can be used to solve the problem of tile leveling, positioning, tile leveling in the tiling process. Welcome to buy.
Conventional tile leveling aids are mainly the following.
Tile positioning leveler, plastic tile leveler, tile leveler pliers, tile leveler spacers, tiling tile positioning leveler, tile leveling pliers, tile positioning leveling leveler, tile leveler push pliers, tile leveler push tight pliers, tile leveling system, tile leveler, tile high device, tile clearer, tile leveler, tile leveler, tile leveler, floor tile leveler, tile leveler, tile leveler, tile flattening, tile leveler, tile tiling leveling tools, plastic leveler
Tile leaving seam, wall to 1-2mm is good, some small tiles (100x100mm), in order to beautiful, leaving seam instead need to be large.
Ground leave seam, in addition to vintage tile outside need to leave a larger gap (5mm-10mm), other tile species generally to 3-10mm as good.
The following data is for reference only, the specific size selection sometimes also according to personal preferences and aesthetics.
1.0mm1.5mm for seamless tiles and marble tiles
2.0mm for wall tiles
2.5mm,3.0mm for small size tiles
4.0mm,5.0mm,6.0mm for medium size tiles
8.0mm10.0mm for large size tiles and outdoor tiles
Four, tile positioner product use.
First of all, we need to clarify, in the home tiling, we leave the seam what is the purpose?
First, in order to adjust the size of the wall tile error, grasp the overall beauty; and tile positioning piece and tile leveler (tile leveler) is used for the purpose of adjusting the size of the gap in the middle of the tile, so that the tiles are taped neatly and beautifully, so that the gap between the tiles are consistent and uniform.
Second, is to the wall tile sagging reserved expansion joints, to avoid the wall tiles due to the upper row of wall tiles on the lower row of wall tiles produced by the extrusion of wall tile bulging, falling off.
We are in the actual tiling process, in addition to pay attention to tile seam, the overall effect of tile paving and tile tiling out whether the flat, when the tiles between a high, a low, not only affect the beauty, more likely to accumulate dust, water. Tile leveler can be a good solution to such problems. Our company produces and sells a variety of tile levelers, welcome to buy! Plastic cross, XX products, must be the best.
Tile laying, must pay attention to leave seams, now there are some so-called seamless tiles, in fact, just a tricky practice. Tile leave seams, not only to deal with the problem of untidy specifications, but most of all to thermal expansion and contraction reserved position.
In the past, perhaps everyone has heard of seamless steel pipe this thing. Now some of the hype about seamless tiles, consumers need to pay attention. Decoration aside, we know from a physical point of view to see that this is theoretically impossible to say: seamless steel pipe expansion is the whole 360 degrees outward, so there will be no cracks.
And most of the tiles are constructed in a relatively closed space, taking the wall as an example, the general left and right and the following part must be closed with fixed walls and floors, if the tiles are treated seamlessly in the construction, then when the expansion, it elongates there? Obviously, a prerequisite for seamless tiles to be realized is that the thermal expansion and contraction of the tiles is zero. We know that this possibility is zero. So what is the consequence of forcing a seamless finish? It is impossible for a tile to thermally expand and contract and push down the wall, because the adhesive force on its back cannot be greater than the force pushing the wall.
Then there is only one consequence: tile arching.
Tile tiling success or failure of the standard is the overall effect of tiling out in line with the beautiful, neat standards, so the uniform stay seam, tile corners and corners between the neat, tile and tile level, is the standard of measurement.
Tile cross according to the use of the pendulum can be a good solution to the tiling process tile retention, alignment of the four corners and other issues, the combination of tile leveler can solve the tile retention, fixed, tile leveling a series of problems. According to the tile thickness, size and other different can choose different tile cross and tile leveler.
"T" type tile locator is with the development of tiling technology and the emergence of the traditional tiling process basically using cross-shaped tiling method, and with the development of tiling technology and people's aesthetic differences, now tiling methods are increasingly diverse, such as "work" Character tiling method, "Y" shaped tiling method, or a combination of various tiling method, this time the ordinary "ten" tile locator has been difficult to meet the requirements of tiling, and the production of "T "T"-shaped tile locator, and a good solution to the different tiling process caused by the problem of leaving a gap. In addition to this, "T"-shaped tile locator can also be a good solution to the wall and ground contact at the retention and positioning problems.
Tile positioning cross is a plastic product that has emerged in recent years to facilitate tiling, tile positioning cross is a kind of tile positioner, according to the shape, role can be divided into: tile cross, tile T-frame, wedge-shaped tile insert or spacer. Among them, the tile positioning cross technology, the most mature application, the most complete specifications, from 1.0MM to 10.0MM, and even some non-mainstream specifications such as 0.5mm-3.5mm-4.5mm, etc. thus making the tile cross specifications more finely divided.
Tile positioning cross models are also diverse, in addition to the most basic standard size, and according to the length of the cross, thickness, whether solid, etc. can be divided into, standard, lengthened, thickened, thickened and lengthened, hollow type, etc., its role is no different, lengthened or thickened design can make the tiler paving tiles more convenient, the principle of its role is the same, the role of the conventional tiling process, for the more complex tiling process, can only play a role in leaving the seam.
1.0MM tile cross is currently more commonly used cross specifications, mainly for some small spaces such as kitchens, bathrooms, restaurants, or some suitable for "seamless" tiling, in addition to the more popular marble and other large size tiles will also leave a thin seam
Type 2.0: 2.0T tile positioner, mainly used for a variety of special occasions and a variety of special tile paving process, such as the ground and wall tile joints, such as the use of "work" type "Y" type tile paving process, when the conventional cross tile cross can not meet the requirements of the paving process. 2.0T tile positioner. Using thickened and lengthened design width 2.0MM long 24MM thick 2.8MM, so that the product is easier to hold and put.
3.0T type 3.0MM "T" shaped tile positioner produced by our company adopts thickened and lengthened design, with a length of 24MM and a thickness of 3MM, which is fuller and easier to hold than the standard tile positioner, and effectively improves the construction efficiency. The state.
5.0T type: 5.0MM "T" type tile cross is widely used in balconies, walls and ground joints, and a variety of "work" tiling process. The product is injection molded from pure HDPE raw materials, injection process without adding back materials, the product appearance is full of transparent in line with foreign trade environmental standards
5.0 cross with longer and thicker models: 5.0MM with thicker and longer design, larger than the standard style size, so that the construction process is easier to take and put. 5.0MM tile positioning cross is mainly used for doorway corridors, balconies, exterior wall tiles, outdoor tiles and other places.
10.0MM has the standard model, with handle model, T-shaped model, mainly used for exterior wall tiles, large outdoor tiles and other places to stay seam positioning use. Production of a full range of tile crosses: standard models, thickened and extended models, models with handles, removable models, hollow models, T-shaped frame, Y-shaped frame, wedge-shaped spacer, etc., the products are made of new raw materials injection molding, can be customized, customized brand sales.
Tile positioning cross as a tile paving process auxiliary materials have been widely should be used in home decoration, engineering decoration. According to the tile paving technology, process is different, divided into vertical paving method, horizontal paving method, combined paving method, "ten" paving method, "T" shaped paving method, diamond paving method, etc., although the tile paving method varies, but the tile paving success is judged or not Judgment criteria, that is, the same uniform stay seam, tile surface level consistent. Tile positioning cross can be a good solution to the tiling process to leave a seam. As shown in the figure (tile positioning cross placed horizontally).
Product operation diagram.
Insert the cross into the adjacent side of the tile. Advantages: can be very easy to leave a gap to the tile applicable to all sizes of tiles. Disadvantages: can only leave a gap for the tile processing. No role in fixing, positioning, etc.
Directly placed in the four corners of the tile. Advantages: the use of less, can accurately play the role of fixed tiles, four corners positioning, tile seam. Disadvantages: more inconvenient to take and put, mostly used in small and medium-sized tiles.
Combination of the advantages of the horizontal and vertical placement of two kinds of placement. Can be precisely positioned. Leave seams and suitable for all sizes of tiles.
Example of use: positioning and seam allowance when using the "work" method (vertical placement)
Example of use: Positioning and seam allowance at the joints between walls and floors.
Example of use: the use of "work" when the positioning and retention of seams (horizontal)
Seven, the advantages and disadvantages of different types of tile positioner.
The use of products placed horizontally can be a good solution to the problem of tile seam, four corner positioning, tile fixing, etc., at this time a product can control a piece of four different tiles, that is, a tile positioning cross can control four tile seams, the disadvantage is that the product is not easy to remove after use. The use of horizontal placement, product use can be calculated according to the number of tile pieces of double the amount of purchase and use.
As shown in the figure (tile positioning cross placed vertically).
The advantage is that it can be taken out after use, the disadvantage is that it is not necessary to solve the problem of tile positioning, and because the width and thickness of the tile positioning cross is not the same size, so it often leaves the wrong seam, at this time a product can be a piece of tile, that is, a tile positioning cross control a tile seam, using the vertical placement method, the amount of product use can be calculated according to the number of tiles 4 times -5 times the amount of purchase and use.
As shown in the figure (tile positioning cross horizontal and vertical combination of placement).
The actual tiling process we tend to use a combination of horizontal and vertical two pendulum method of use, especially in the tiling of large size tiles, using a single horizontal or vertical pendulum method, because the product is much smaller than the tiles, often can not leave a good gap or positioning, although like our company also introduced thickened and longer models, but for huge tiles, and can not be a good solution, so the construction process is still very common two pendulum method together, taking its advantages.
Plastic cross dosage: under normal circumstances, a tile with a, 5mm plastic cross if the brick dry almost after you can take down and use, generally can be used three times, so you can save some money; but 3mm and 2mm is not easy to take down, or easy to snap off the brick, only after the brick is completely dry can take down, so it is generally difficult to reuse, do not want to take down on the inside after filling the seam invisible, it is recommended to buy in accordance with the principle of a tile with a plastic cross.
1.1 to prevent the tile locator products receive external moisture in the air
1.2 to prevent the tile locator products receive external pollution
2.1 Neutral label packaging
2.2 Neutral hanging card packaging.
2.3 Printed label packaging
2.4 Plastic drum packaging
In addition, we can customize various packaging forms according to customers' requirements.