Replacement Steel Needles for Tile Leveling System

Replacement Steel Needles for Tile Leveling System Review

Instructions

Features:

• 1. Wear-resistant, recyclable.

• 2. Easy to use DIY operation.

• 3. Balance tiles in the same horizontal position.

• 4. Increase tile installation speed.

• 5. Reduces installer fatigue/stress.

• 6. Virtually no crack-free, flat surface.

• 7. Reduces the need for grinding and polishing.

• 8. Prevents tiles from moving during the setting process.

Specifications:

• Name: Steel Needles for Tile Leveling System

• Material: stainless steel

• Length of steel needle: 32mm/1.26"

• Thickness of steel needle: about 1.5mm

• Type:100pcs Steel Needles

Package:

• 100 * Steel Needles

Note:

• 1. This product contains only steel needles, not straighteners. The picture of the leveler is only the effect of use.

• 2. Due to a variety of factors such as monitor brightness and lighting brightness, the actual color of the item may vary slightly from the website picture.

• 3. Please allow a slight manual measurement deviation in the data.

Use Tips:

• Lay the first tile, leaving more than 2mm (with cross spacers). Close to the tiles.

• Insert the T-pin along the gap between the tiles.

• Then rotate 180 degrees with the T-pin stuck on the bottom of both tiles.

• Adjust the cover by hand/special wrench until both tiles are on the same level.

• After leveling, about 5-6 hours, before the cement/adhesive is completely dry, reverse the lid and remove the 180 degree T-pin until the word is removed.

Avoid not removing the T-tile leveling system:

• 1. Tile shim 2mm or more (cross shim recommended)

• 2. When leveling, the cement or tile binder around the T leveler must be cleaned.

• 3. About 5-6 hours after leveling, before the tile adhesive or cement is completely dry, remove the T leveler.